Long Rinsing Program; General Maintenance; Moving The Appliance; Electrical Or Electronic Product At End Of Service Life - Rowenta AUTOMATIC Manual

Table of Contents

Advertisement

Remove, fill and
replace the tank.

GENERAL MAINTENANCE

Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body of the appliance on the outside using a moist cloth.
Clean the cleaning tray, the drip tray and its
grid, the coffee grounds collector and its
front part using warm water and washing
up liquid detergent.
These parts are not designed to go into the dishwasher.

MOVING THE APPLIANCE

Keep the packing and use it again to move the appliance.
If the unpacked appliance is dropped, it is advisable to have it inspected by an authorised Service
Dealer.

ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE

Let's all help protect the environment !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.

LONG RINSING PROGRAM

The appliance will warn you when you need to perform long rinsing through
the "clean" and "calc" lights flashing.
Under the coffee outlets
and steam nozzle place
a recipient that can
contain at least 0.15 L.
To make the cleaning of the coffee grounds
collector easier, dismantle it as shown above.
Press the "Service"
key to start up the
long rinsing program.
The "clean" and
"calc" lights will
become fixed.
14
GB
Once long
rinsing has been
completed, the
'clean' and 'calc'
lights will go off.
Rinse the water
tank with fresh
water.

Advertisement

Table of Contents
loading

Table of Contents