Rowenta Automatic ES6930 Manual page 13

RINSING OUT THE CIRCUITS: SEE PAGE 6
MACHINE CLEANING PROGRAM – TOTAL DURATION: ABOUT 20 MINUTES
You should perform the cleaning program about every 350 preparations of espresso or coffee.
The appliance will let you know when you need to proceed with cleaning through the 'clean' light
coming on.
Caution! To benefit from the guarantee conditions, it is essential to perform the appliance
cleaning cycle when informed to do so. Be sure to follow the order of operations.
You can continue to use the appliance, but you are advised to perform the program as soon as possible.
To perform the cleaning program, you will need a container with minimum capacity of 0.6 litres
and a KRUPS (XS 3000) cleaning tablet.
Press the key to start the
automatic cleaning program
when the "Cleaning needed"
message is displayed.
If your machine is unplugged when cleaning or if there is a power cut, the cleaning programme
willre-start at the step in progress when the incident occurred. You will not be able to postpone
this operation. This is essential due to water system rinsing reasons. In this case, a new cleaning
tablet may be required. Be sure to complete the entire cleaning cycle to avoid any risk of irritation
(seek medical advice if cleaning solutions are accidently swallowed). The cleaning cycle is a
continuous cycle and the pump can be heard intermittently. Do not put your hands under the
coffee outlets during the cycle.
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that
may result from the use of tablets from other brands.
You can obtain cleaning tablets from ROWENTA Service Centres.
Make certain to protect your work surface during cleaning cycles, especially if they are made of
marble, stone or wood.
AUTOMATIC SCALE REMOVAL PROGRAM – TOTAL DURATION: ABOUT 22
MINUTES
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please remove
this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance will
automatically warn you with a message when you need to proceed with scale removal.
Caution! To benefit from the guarantee conditions, it is essential to perform the appliance scale
removal cycle when the appliance tells you to do so. Be sure to follow the order of operations. You
can continue to use the appliance but you are advised to perform the operation as soon as possible.
YOU MUST REMOVE YOUR CLARIS-AQUA FILTER CARTRIDGE BEFORE STARTING THIS PROGRAM.
Just follow the instructions
shown on the screen.
11
The automatic cleaning program is in
three parts – the cleaning cycle itself,
then 2 rinsing cycles. This program
lasts about 20 minutes.
Press to perform cleaning at
any time and then choose
MAINTENANCE => OK => CLEANING
from the menus displayed..
GB