Page 1
Claris water filter in accordance with Rowenta instructions. Abnormal wear and tear of parts (grinding disks, valves, seals) is exempted from the warranty, as well as damages caused by foreign objects in the grinding mill (e.g.
CONTENTS DESCRIPTION ................................Information on espresso coffee ........................Safety instructions ............................... Limits to use ................................BEFORE FIRST USE ............................. Measuring water hardness ..........................Claris - Aqua Filter System cartridge ......................Putting the filter in place ..........................PREPARING THE MACHINE ..........................First use / Machine settings ..........................
Page 3
DESCRIPTION Water tank handle/lid Coffee bean container lid Coffee bean container Servicing flap with cup rest Water tank Display screen Rotating button Cleaning tray Coffee grounds collector Steam nozzle Water level floats Coffee outlets with height adjusting handles Removable drip grid and tray Grinding fineness setting button Metal grinding wheel...
Page 4
Dear Customer, Thank you for having purchased this Rowenta Automatic. We are sure you will enjoy both the qua- lity of the coffee it makes and how easy it is to use. Whether you want a short, strong shot of a ristretto, a good espresso, a larger and milder lungo, or...
Page 5
• Apart from cleaning and scale removal in accordance with the appliance’s user instructions, any intervention on the appliance must be performed by an authorised ROWENTA service centre. • In the interests of safety, only use accessories and consumables certified by ROWENTA for your appliance.
BEFORE FIRST USE MEASURING WATER HARDNESS Before using the appliance for the first time or if you have noted a change in water hardness, it is advisable to adapt the appliance to the observed water hardness. To determine the water hardness, use the measuring stick delivered with the appliance or get in contact with your water board.
PUTTING THE FILTER IN PLACE To prime the cartridge correctly, follow this procedure every time you fit a cartridge. When using later or replacing the cartridge : Select the "FILTER" function using the Prog button : Maintenance -OK - Filter - OK - Place or change -OK - and follow the instructions on the screen. Installing the cartridge in the Place a 0.5 L container machine.
FIRST USE / SETTING MACHINE PARAMETERS Use the rotating button to select a function, increase or reduce values. Confirm your choice using the OK key. Use the rotating button to Select Confirm Press to turn your choose a language (high- appliance on.
Page 9
PREPARING THE GRINDER Adjust the fineness of your coffee grinding to set the strength of your coffee. The finer the grind setting, the stronger and creamier the coffee will be. Turn the “Grinding fineness setting” button to set the degree of grinding fineness. Turn clockwise Turn anticlockwise for a coarser...
MAKING A LONG COFFEE The amount of water required for a long coffee is between 120 and 240 ml. The machine automatically carries out a double cycle, do not remove your cup before the process has ended. The ground coffee is first moistened using a little hot water after the grinding stage. A few moments later, percolation as such begins.
PREPARING STEAM Steam froths up the milk to make a cappuccino or a caffe latte, for example, and also heats up liquids. As you need a higher temperature to produce steam than to make an espresso, the appliance runs an additional pre-heating phase for steam. While the screen displays the drink selection menu, press the “steam”...
SETTING UP THE AUTO-CAPPUCCINO XS 6000 (SOLD SEPARATELY) This auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte. XS 6000 Attach the various Select the cappuccino Fill up the milk pot Place your cup Press the button parts together.
Page 13
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that may result from the use of tablets from other brands. You can obtain cleaning tablets from ROWENTA Service Centres. Make certain to protect your work surface during cleaning cycles, especially if they are made of marble, stone or wood.
“Scale removal needed” message is displayed. The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing cycles. Only use KRUPS scale removal products. You can obtain scale removal products from ROWENTA Service Centres.
OTHER FUNCTIONS: Press the key from the drinks choice screen to access the appliance’s other functions menu. Use the rotating button to browse through menus and options for all settings and validate your choice using the OK button. Press the button to cancel a choice and go back to the drink selection menu.
PRODUCT INFORMATION MACHINE INFO Displays the total number of coffees the machine has made. Coffee cycles Displays the total number of hot water cycles the machine has performed. Water cycles Displays the total number of steam cycles the machine has performed. Steam cycles Rinsing Displays the total number of rinsing cycles the machine has performed.
If you have any product problems or queries, please contact our Customer Relations Team first for expert help and advice: 0845 602 1454 - UK (01) 677 4003 - ROI or consult our website - www.rowenta.co.uk PROBLEMS AND CORRECTIVE ACTIONS The appliance does not switch on Check that the plug of the power cord is pushed correctly when the “On/Off”...
Page 18
Do not remove the water tank before the end of the cycle. message “Error code XX” Unplug the appliance for 20 seconds, remove the Claris appears. cartridge and if required, put it back into service. If the fault persists, note the fault number and contact ROWENTA Customer Service.
Page 19
Here are some recipes you can make using your Rowenta Automatic : • Cappuccino For a cappuccino, the ideal proportions are as follows: 1/3 hot milk, 1/3 coffee, 1/3 milk froth. • Caffe Latte To make coffee with milk, also often called Latte Macchiato, the proportions are as follows: 3/5 hot milk, 1/5 coffee, 1/5 milk froth •...