Before First Use; Measuring Water Hardness - Rowenta Automatic ES6930 Manual

BEFORE FIRST USE

MEASURING WATER HARDNESS

GB
Before using the appliance for the first time or if you have noted a change in water hardness, it is
advisable to adapt the appliance to the observed water hardness. To determine the water hardness,
use the measuring stick delivered with the appliance or get in contact with your water board. The
appliance will ask you for the hardness of your water on first use (see First use / Setting machine
parameters section).
Degree of
hardness
° f
° dH
° TH
1 sec.
water testing: Fill a glass
with water and immerse a
water testing stick into it.
CLARIS - AQUA FILTER SYSTEM F 088 CARTRIDGE (SOLD SEPARATELY)
To get the best taste from your coffee and extend your appliance's service life, we advise you to use
only the Claris - Aqua Filter System cartridge sold as an accessory.
The cartridge comprises a scale-removing substance and activated carbon that reduces chlorine,
impurities, lead, copper, pesticides, etc. that are present in the water. Minerals and trace elements
will then be preserved.
F 088
Your appliance will give you a message telling you when to replace your Claris - Aqua Filter
System cartridge.
The Claris cartridge needs to be replaced after approximately 50 litres of water used or every two
months at least.
* indications provided by the manufacturer
0 1
very soft soft
<5,4° >7,2°
<3° >4°
<3,75° >5°
After 1 minute the hardness measurement will appear (moderately hard water)
Filter the water using the Claris - Aqua
Filter System cartridge to reduce
carbonate hardness by as much as 75 %*
Chlorine – up to 85 %*
Lead – up to 90 %*
Copper – up to 95 %*
Aluminium – up to 67 %*
2
moderately
hard
>12,6°
>7°
>8,75°
0 1
4
3
hard extremely hard
>25,2° > 37,8°
>14° > 21°
>17,5° > 26,25°
2
3
Mechanism to
memorise the month
the cartridge was
fitted and when to
replace it (after 2
months at most).
4
4