Panasonic HL-C1 Series User Manual page 74

5-2-10 Measurement Mode
It is possible for the controller to use the 2 modes described below selectively. Based on
the object to be measured, select the appropriate measurement mode (diffused
reflection/specular reflection) for each sensor head.
• Diffused reflection measurement : Used when measuring something without a mirrored
• Specular reflection measurement : Used when measuring a substance with a mirrored or
1. Display the measurement type screen.
Touch
screen changes to the measurement setting
screen. Touch
changes to the measurement type screen, and
the measurement
displayed.
2. Change measurement mode, using the
"Measurement Mode" key.
Change the measurement mode for each
sensor head (H1: sensor head 1, H2: sensor
head 2) to change the screen as below each
time the key is touched.
For diffused reflection, do not attempt to change the measurement mode to "Specular
reflection" because it will not operate properly. If measurement mode is changed to the
"Specular reflection" by mistake, return the mode to the "Diffused reflection" prior to use.
3. The screen returns to the MENU screen when
touched, and to the measurement setting screen when
is touched.
Touch to return the screen to the MENU screen or
to change to the measurement setting screen.
Touch to return the screen to the Sensor Head 2
measurement method screen.
surface or not transparent. It is initially set to "Diffused
reflection".
transparent surface. Select this mode and execute
"Save" (page 5-42) prior to use. Incline the sensor
head toward the direction of specular reflection,
referring to the "Installation dimensions" on page 2-5.
on the MENU Screen. The
. The
mode currently
CHAPTER 5 FUNCTION ITEMS
MENU Screen
screen
set is
Measurement
mode key
is
5-14
Measurement Setting Screen
Measurement Type Screen
Measurement Method Screen