Panasonic HL-C1 Series User Manual page 37

CHAPTER 2 INSTALLATION
2-5 Mounting the Compact Console
Mount the installation plate using the enclosed mounting fittings (4) and installation
screws (4).
(1) Insert the compact console unit in the mounting plate.
(2) Fit the mounting plate in the groove in the compact console unit, then tighten screws,
fastening the compact console to the mounting plate.
• Tighten screws with a torque of 0.1 to 0.25N·m.
• Use a panel 1.0 to 5.0mm thick.
Clearances During Mounting
When mounting the compact console, if other parts are on the panel and wiring is required,
it is recommended that a clearance of 30 to 50mm be allowed around the compact console
to prevent damage to cables, improve workability, etc. Do not cover slits in the console unit.
Wiring the Connection Cable Terminal (Supplied)
• Connection cable terminal wiring is shown at right.
• Before connection to the controller, turn off both the compact console and controller.
• To prevent disconnection due to vibration, fix the connecting cable near the compact
console within 20cm of the COM. port.
Screw tightening torque: 0.1 to 0.25N·m.
Do not exceed the above torque range.
If doing so, the front surface will be deformed.
This causes the malfunction of the touch switches.
Enlarged view
Insert to the end.
2-11