Panasonic HL-C1 Series User Manual page 20

(1) Laser Emission Indicator (Green)
Lights during laser emission from sensor head 1 or sensor head 2, or immediately before
laser emission.
(2) BRIGHT Indicator (Red)
Lights when light emitted by sensor head 1 or sensor head 2 is excessive, preventing
measurement.
(3) DARK Indicator (Red)
Lights when light emitted by sensor head 1 or sensor head 2 is insufficient, preventing
measurement.
(4) Not used.
This port is for adjustment at the factory before shipping.
(5) COM. Port
Used for RS-232C communications with a personal computer.
(6) Connector for Compact Console
This enables measurement values to be displayed using the compact console and
connection of the compact console exclusive connection cable when setting each setting.
(7) Not used.
This port is for adjustment at the factory before shipping.
(8) Sensor Head 1 Connector
The controller operates the sensor head connected to this connector as sensor head 1.
(9) Sensor Head 2 Connector
The controller operates the sensor head connected to this connector as sensor head 2.
For a system with only 1 sensor head connected to the controller, connect to the sensor
head 1 connector (8).
(10) Power Supply Terminals
Supplies 24V DC.
(11) External Output Terminals
(12) External Input Terminals
(13) DIN Rail Mounting Hook
Can be mounted on a 35mm width DIN rail quickly.
CHAPTER 1 NAMES AND FUNCTIONS OF PARTS
1-2