Table of Contents
Advertisement
Teldat S.A.
Switch parameters with a 2G connection
RSSI Threshold: When the RSSI (Received Signal Strength Indicator) drops below this threshold, in dBm, the
backup interval initiates.
Threshold Interval: Backup interval. Specifies the number of minutes with the RSSI below the threshold before
changeover to the other carrier takes place.
Switch parameters with a 3G connection
RSCP Threshold, ECNO Threshold & Threshold Interval: Coverage is provided by RSCP in dBm and by EcNo
in dB. When one of these is continuously equal or less than the configured values during a time indicated in
minutes in the Threshold Interval field, changeover to another carrier is carried out.
Switch parameters with an LTE connection
RSRP Threshold, RSRQ Threshold & Threshold Interval: Coverage is provided by RSRP in dBm and by
RSRQ in dB. When one of these is continuously equal or less than the configured values during a time indic-
ated in minutes in the Threshold Interval field, changeover to another carrier is carried out.
2.6.5 DHCP
This page allows you to configure the device's DHCP server.
Nets – DHCP.
Fig. 73:
This page is divided into the following sections:
(a) Global DHCP Settings
Regesta-PLC
2 Web Interface
33
Advertisement
Table of Contents
Need help?
Do you have a question about the Regesta-PLC and is the answer not in the manual?