Networks - Teldat Regesta-PLC Manual

2 Web Interface
simply click on the Cancel button.
Fig. 53:
(c) Remove Interfaces
Allows you to remove any of the interfaces and subinterfaces created in this page by selecting them from the
pull-down menu and clicking on Remove.
Interfaces – Remove Interfaces.
Fig. 54:

2.6.2 Networks

Here you can define the IP addresses for each interface and subinterface created on the previous page, as well as
for the loopback interface. Additionally, you can enable or disable routing traffic (IP) control between local subnets.
Nets – Networks.
Fig. 55:
This page is divided into the following sections:
(a) Network Settings
22
Interfaces – VLAN configuration – Editing the configuration for a VLAN.
Teldat S.A.
Regesta-PLC