Nets Menu; Interfaces - Teldat Regesta-PLC Manual

2 Web Interface
• Removing a subnet
To remove a subnet, first select it from the pull-down menu and then click on Remove.
Fig. 45:
(c) Host List
There is a list at the end of the page showing the hosts that have already been configured. The goal is for the
user to view the hosts the device sends traps to more easily.
SNMP – Host List.
Fig. 46:
(d) Subnets List
For that same reason, configured subnets from where SNMP petitions can be executed are shown in table
format.
SNMP – Subnets List.
Fig. 47:

2.6 Nets menu

Lets you configure the router's network parameters.
Nets Menu – REGESTA-PLC with WWAN and PRIME technologies.
Fig. 48:

2.6.1 Interfaces

On this page, the user can create and remove interfaces and subinterfaces (as well as configure VLANs).
20
SNMP – Community Subnet – Removing a subnet.
Teldat S.A.
Regesta-PLC