Logs Menu - Teldat Regesta-PLC Manual

2 Web Interface
- Number of opened sessions.
- Maximum number of concurrent sessions.
- Packets sent and received.
Status – TCP Connections information
Fig. 30:
• Topology Information :
This table provides information on the nodes, which define the system topology. There are 2 types of nodes:
- Base Node: This is the local node (the router).
- Service Node: Rest of the nodes (switches and terminals) making up the system.
Status – Topology Information
Fig. 31:
The meaning of some of the above columns is as follows:
LNID: Node identifier on the PRIME network.
SID: Located on the Service Nodes list, this identifies the switch the Service Node is connected to. If there is no
switch (Service Node is directly connected to the Base Node), the parameter value is 0x00.
LSID: Located on the Service Nodes list, this identifies the nodes with a switch role.
DISC: Shows the number of disconnections detected.
UP-TIME: Total time the node remains connected.
%: UP-TIME percentage with respect to the Base Node UP-TIME.
CNX-TIME: Length of time the node remains connected in the current active connection.

2.4 Logs menu

Accesses pages where you can see the evolution of the status for the device's 2G/3G/LTE module.
14
Teldat S.A.
Regesta-PLC