Teldat Regesta-PLC Manual page 23

Teldat S.A.
Fig. 41:
• Editing a host configuration
To execute this, select the host from the pull-down menu and (once you have made the appropriate changes)
click on Apply. This section allows you to modify all data except the host IP address.
To cancel the changes you've made and return to the information the device had on said host, click on Cancel.
Fig. 42:
• Removing a host
To remove a host, first select it from the pull-down menu and then click on Remove.
Fig. 43:
(b) Community Subnet
Allows you to define the subnets where SNMP petitions can be executed.
• Adding and configuring a subnet
To add a new subnet, select the New Subnet option from the pull-down menu, indicate its IP address and sub-
net mask then click on Add.
Fig. 44:
Regesta-PLC
SNMP – Hosts – Adding and configuring a host
SNMP – Hosts – Editing the configuration for a host.
SNMP – Hosts – Remove a host.
SNMP – Community Subnet – Adding a subnet.
2 Web Interface
19