Teldat Regesta-PLC Manual page 27

Teldat S.A.
Allows you to assign/modify IP addresses for Ethernet subinterfaces and GRE interfaces, offering the possibility
of defining up to six secondary IP addresses for each of them. To view, add, modify or remove these latter ad-
dresses, click on the Secondary IP Addresses button. Once you have configured an interface, click on Apply to
save any changes made.
Cancel allows you to cancel the changes being specified for an interface. When clicked, the information the
device had stored on this interface is shown once more.
Networks – Networks Settings.
Fig. 56:
The Hide button lets you hide the Secondary IP Addresses, but never to disable them.
Additionally, this section allows you to delete the IP address the device has configured by default from the con-
figuration. To do this, select the Ethernet0/0 interface from the pull-down menu and click on Delete IP Address.
Networks – Networks Settings – Removing the default IP address.
Fig. 57:
(b) Traffic Control Settings
Allows you to enable or disable routing traffic (IP) control between local subnets, filtering the flow of packets
between local interfaces.
Regesta-PLC
2 Web Interface
23