2N NetSpeaker Manual page 92

Edit Session
Enter this command to edit a session. A session is defined by the SessionId parameter.
If the value differs from the values in the database, a new session will be created. If
the parameter value is equal to the value of an existing session, the existing session
with the specified value will be adjusted according to other parameters. Name =
session name, Priority, Channel = session channel, MasterVolume = session volume,
MasterBalance = session balancing value, MasterFadeTime = time during which the
volume or balance change is effective if requested, PanelUserId = relates to the
console panel, PanelMode = relates to the console panel, PanelVirtualInputId = relates
to the console panel, FreeRideId = relates to the console panel.
<msg Id="CTI_NSPK_SET_SESSION_REQ">
<CTI_IE_REFERENCE Ref="0x421"/>
<CTI_NSPK_IE_SESSION SessionId="0x7" Name="Moje session upravena"
Flags="0x0"
MasterBalance="0"
PanelMode="USER"
FreeRideId="0xFFFFFFFF"/>
</msg>
<msg Id="CTI_NSPK_SET_SESSION_CONF">
<CTI_IE_REFERENCE Ref="0x421"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
Priority="1" Channel="999"
MasterFadeTime="0"
Response
MasterVolume="4096"
PanelUserId="0xFFFFFFFF"
PanelVirtualInputId="0xFFFFFFFF"
92