Quick Start - 2N NetSpeaker Manual

4.1 Quick Start

Presentation Case Overview
In this document, we introduce the
and show how to use it. The device is connected to the speaker already and the system
is ready to Plug and Play. The section also includes safety precautions.
Here is what you can find in this section:
System Turn–On
2N
Session Creating
Broadcasting
System Turn–On
In this section, we provide you with the steps how to turn on the system installed in
the presentation case. Please follow the instructions below.
After opening the case, you will find
On the left side, you can see the speaker built in a case. On the right–hand upper
side, you can locate the PoE injector, which supplies
Ethernet. On the lower right–hand side, there is space for connecting cables
(230V AC power supply, CAT5 RJ 45 Ethernet cable). See next figure.
Pull out the connecting cables and connect the power supply cable to the power
outlet.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Net Speaker Connection
®
2N NetSpeaker unit turns ON, you can see blue/green light on the 2N
NetSpeaker front panel.
The default settings of the unit are as follows:
STATIC IP settings:
®
2N NetSpeaker product in a presentation case
®
2N NetSpeaker in the middle of the field.
®
2N NetSpeaker over
53
®