2N NetSpeaker Manual page 41

Basic parameters
These parameters define how the action shall behave: its trigger and behaviour upon
start.
Action type – define the action trigger: either the logical input to 2N
NetSpeaker Button press
select the time value and start day in
Planning
Action duration – set the action end.
Specific time – set the action duration using the following
Repeat n–times – define how many times the playlists selected in the Playlist
shall be played. Use the
Repeat all around – make playing never stop. This option is particularly
comfortable in connection with the HW button: press the button once to start the
action and repress it to stop the action.
Fade between two actions
Prefer to server – enable this parameter to interrupt the current playing from
the server whenever the action starts.
Use as default – define which action is the default one and must be checked off.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: Synchronisation Properties
( ) or a time value (
.
Repeat count
At time ). If you select time,
Action planning ; refer to Subs.
Duration in (s)
item.
®
Action
field.
41