Administrator - 2N NetSpeaker Manual

2.9 Administrator

The Administrator
the state of the system. The tag contains general settings and administration.
General Settings
General settings are provided in this section.
Language setting – set the ControlPanel language.
Audio devices – select the output for listening in.
listen to sessions locally and select a device to which the sound will be routed.
These devices depend on the PC configuration.
Sessions – set more session parameters.
Multicast addresses – set the multicast addresses. Select multicast for address
scope, multicast for port scope or single IP address transmission. The default
address scope is 239.0.0.0/8. Fig. 1 shows the default setting for address scope.
API – set the port to be used for
restriction.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
What you should know
Access via API is restricted to 10 clients by default.
Multicast is active on addresses 239.0.0.0/8 in 2N
NetSpeaker by default.
Trace can be saved and help communicate your problem to the
2N Technical Support department.
tag helps you set other
Display sessions from connected consoles allows you to see even
sessions that are created by Console and Player users with Freeride
privilege.
Display big icons changes the size of the session pictogram.
®
2N NetSpeaker parameters and monitor
Listening-In
®
2N NetSpeaker API connection and client
®
allows you to
45