Speaker connection by "Connection"
Click on
connection. This adds a row to the "List of connections", which will characterise
connection to one
options in the right–hand part of the window; see previous figure.
Connection delay – define the waiting time in ms for the next connection
attempt.
IP address –
IP port – port for
Change
communication.
Once the connection is established, save the setting. Subsequently, the 2N
NetSpeaker Server
shows
the lower part indicates successful detection and instructs you to Add 2N
NetSpeaker to the database
Once the speaker is added, the pictogram becomes dark and the plus disappears. Use
the left or floating menu to
Automatic speaker connection
If the
2N
made possible by the terminal and Telnet connection), you can omit the Create new
connection
to the next figure for automatic connection. Once the speakers are added to the
database, their pictograms become dark and the plus signs disappear.
®
2N
TELEKOMUNIKACE a.s., www.2n.cz
Create new connection
®
2N
NetSpeaker
Figure: 2N NetSpeaker Detection
®
2N
NetSpeaker
®
2N
password – change the password for 2N
starts searching for speakers in the network automatically. Fig.2
®
2N
NetSpeaker
detection – a
remove
®
NetSpeakers
are configured for automatic connection (this configuration is
step and let the
in the left or floating menu to create a new
unit. Click on the connection to display the setting
®
IP address; the default value is 192.168.1.100.
NetSpeaker
communication; the default value is 6998.
®
2N
NetSpeaker
using Menu –> Add speaker to database.
or
rename
a connection.
®
2N
NetSpeaker
units be detected automatically. Refer
®
NetSpeaker
pictogram with a big plus in
®
®
31