2N NetSpeaker Manual page 102

Deactivate Source in Session
Enter the command to disable a session input source. Defined by the CmdPar1 =
SessionId and CmdPar2 = SourceId parameters. If the CmdPar1 and CmdPar2 values
are non-existent, the server replies OK, but no source will be stopped.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="STOP" CmdPar1="0x4"
CmdPar2="0x5"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
102