2N NetSpeaker Manual page 72

srvipaddr
srvport
srvpwd
Firmware Upgrade
Function and Use
This section provides the basic and extended functions of the
t.
Here is what you can find in this section:
2N
2N
2N
Basic Functions:
2N
2N
Use these buttons to adjust volume or change the channel number. Select the button
control mode in the configuration menu for each
NetSpeaker
Manual.
2N
2N
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N NetSpeaker
0
®
by the 2N
®
2N NetSpeaker
1
®
2N NetSpeaker
Default setting: 0
®
2N NetSpeaker Server
i.e. if activemode=1.
Default setting: 192.168.1.1
®
2N NetSpeaker Server
active mode, i.e. if activemode=1.
Default setting: 6999
®
2N NetSpeaker
the active and passive modes of
identical with the 2N® NetSpeaker Server password.
Default setting: admin
®
2N NetSpeaker
NetSpeaker gets connected to the
guarantees that all connected devices have identical and latest firmware
versions. Refer to www.2n.cz for the latest firmware version.
Firmware Installation
®
Refer to the 2N
NetSpeaker firmware installation and control.
®
NetSpeaker Button Control
®
NetSpeaker Remote Control
®
NetSpeaker LED Status Signalling
®
NetSpeaker Button Control
®
NetSpeaker is equipped with two buttons on the front panel.
Control Panel application; refer to the
®
NetSpeaker Remote Control
®
NetSpeaker is equipped with an infrared remote control receiver.
passive mode. The server connection is initiated
NetSpeaker Server .
active mode. The server connection is initiated by
.
IP address. Use the setting in the active mode,
communication port. Use the setting in the
Server connection authorisation password. Used both in
®
2N NetSpeaker
firmware upgrade runs automatically whenever 2N
NetSpeaker Software User Manual for details on
2N
. The password must be
®
2N NetSpeaker Server
®
2N NetSpeaker
®
NetSpeaker unit in the
®
2N NetSpeaker Software User
®
. This
®
2N
produc
®
2N
72