2N NetSpeaker Manual page 101

Activate Source in Session
Enter the command to activate a source in a session. Defined by the CmdPar1 =
SessionId, CmdPar2 = SourceId and CmdPar3 = FileId parameters. If the CmdPar1 and
CmdPar2 values are non-existent, the server replies OK, but no source will be
activated. If the CmDPar3 value is -1 or any non-existent value, the source will be
played from the first file in the sequence.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="PLAY" CmdPar1="0x4"
CmdPar2="0x5" CmdPar3="-1"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
101