2N NetSpeaker Manual page 8

Output – there are different outputs for different roles and so refer to Subss.
1.3.1 – 1.3.3.
List of sounds – or list of audio/music sources in files. Click on
the required file. Play this file using the
Microphone– the left window section controls the hardware microphone of the
PC where Console is running.
You can enable
ton to the right of the lower screen. Listening in
to played files or microphone sound. Select the device to listen in via the
Setting–>Audio settings
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Figure: View of Console Control
for details.
TALK button – used for microphone activation. Upon activation, the ON
AIR sign goes on and the button changes into
even during audio playing from a file.
AUTOMUTE button – used for enabling the "Automatic microphone
activation" function. When you press the button, the
on. Let us give an example
every evening and the presenter announces every song. In this case, the
presenter selects a song from the file at the beginning of broadcasting. He
or she selects Automute
microphone activation
song, the microphone is
not hear the studio noise.
Listening in in the Console application too. To do so, push the
menu.
Play button.
: The "College radio" broadcasts a few songs
and can talk when the song is over –
. When the Play button is pushed for another
automatically deactivated
is used for activation of local listening
Add and select
MUTE . You can broadcast
Automute sign goes
Automatic
and the listeners do
ON
8
but