2N NetSpeaker Manual page 54

To connect to 2N® NetSpeaker via Ethernet, set the Static IP address on your
computer to:
IP – 192.168.1.x (x?100, 0, 255)
MASK – 255.255.255.0
You can check the interconnection by the PING command.
Insert the USB Flash disk in your computer and run /Netspeaker/setup.exe
Confirm the licence agreement.
Set the Complete installation type (install Server, Control Panel and Console) to
c:\Program Files\2N TELEKOMUNIKACE\2N NetSpeaker\.
Follow the wizard instructions to finish the installation.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
IP – 192.168.1.100
MASK: 255.255.255.0
Active mode is OFF –
Login for Server: Admin/2n
®
2N NetSpeaker waits for the Server requests
.
54