2N NetSpeaker Manual page 107

Smooth Change of Source Balance
Enter the command to set the source balance. Defined by CmdPar1 = SessionId,
CmdPar2 = SourceId, CmdPar3 = balance and CmdPar4 = transition time from the
current value to the new one.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Request
<msg Id="CTI_NSPK_CMD_REQ">
<CTI_NSPK_IE_SES_CMD Cmd="SET_BAL" CmdPar1="0x1"
CmdPar2="0x1" CmdPar3="0" CmdPar4="2"/>
<CTI_IE_REFERENCE Ref="0x420"/>
</msg>
Response
<msg Id="CTI_NSPK_CMD_CONF">
<CTI_IE_REFERENCE Ref="0x420"/>
<CTI_IE_RESULT Result="OK"/>
</msg>
107