Table of Contents
Advertisement
Configuring Access Restrictions for Individual Volumes
1
2
3
4
5
Click [Save].
6
Turn back on [iSCSI Service] again.
Note:
Access Restrictions by Mutual Authentication using Username and Password
• Use the following settings to set access restrictions by mutual authentication in addition to the normal access
restrictions:
In the screen described in step 4, check [Mutual Authentication] and set any password you want for [Password (Mutual
Authentication)]. Select [Mutual Authorization] for [User Authorization]. The screen to enter the mutual authentication
password will open. Enter the password you set.
• Changes to access restriction settings will not take effect until the iSCSI service has been turned off and then on again.
You've configured access restrictions for a volume.
TeraStation III iSCSI User Manual
Turn off [iSCSI Service] on the left side of the Web Admin interface.
Navigate to [iSCSI Volumes] - [iSCSI Volumes].
Select the volume that you want to set access restrictions for.
To restrict access by user names and passwords, enable [Access
Control], and enter [Username] and [Password].
To restrict access by IP Address, enable [IP Address Restriction], and
enter the IP addresses that are to be allowed access. Separate each
IP address by a comma.
Example: 192.168.11.1,192.168.11.2
27
Advertisement
Table of Contents
