Buffalo TeraStation III TS-IXL User Manual page 30

5
6
Turn back on [iSCSI Service] again.
By default, the TeraStation adjusts its clock automatically by using an NTP server.
NTP
• NTP may not be usable in some networks.
• The default NTP Server (ntp.jst.mfeed.ad.jp) belongs to Internet Multi Feed Inc. For more information,
please visit www.jst.mfeed.ad.jp.
• Use NTP at your own risk. Buffalo Technology is not responsible for any loss or damage caused by using
of this service, stopping the service, or missing service.
Notes:
• You may need to configure DNS to access an NTP server.
• The TeraStation's internal clock may run at a slightly different speed from other clocks on you network, and over a long
period of time your network devices may show different times. If clocks on your network vary by more than 5 minutes it
may cause unexpected behavior. For best results, keep all clocks on the network set to the same time by adjusting them
regularly, or use an NTP server to correct them all automatically.
Name and time settings for the TeraStation are complete.
TeraStation III iSCSI User Manual
1 To manually configure the date and time, click [Manual] for [Date/Time
Source] and adjust [Date], [Time], and [Time Zone].
Note:
Click [Use Local Date/Time] to use the time and date from your computer's
settings.
2 Click [Save].
29