Buffalo TeraStation III TS-IXL User Manual page 9

Current status Displays Current status of the selected volume.
* You must register TeraStation as an iSCSI hard drive at [Target product] to display it.
User authorization Displays user authentication for the specified volume.
* You must register TeraStation as an iSCSI hard drive at [Target product] to display it. It is not displayed
when the volume is already connected from other computer.
Connect on Start Up Displays check mark in the check box, and click [Connect] or [Remove] to set the volume automatically
connected when the computer is booted (always connected).
Uncheck the check mark and click [Connect] or [Remove] to set the volume automatically not connected
when the computer is booted (always connected).
* You must register TeraStation as an iSCSI hard drive at [Target product] to display it. It is not displayed
when the volume is already connected from other computer.
Refresh Search the TeraStation within the LAN.
Exit Exit iSCSI Hard Disk Connection Tool.
Menu Navigation:
File Refresh
Exit
Setup Browse Web setting
Change IP Address
Remove the registered iSCSI Hard Disk
Set Mutual CHAP Secret
Use share folder on a Persistent Volume If TeraStation is always connected and folders are shared in the network, click
Connect some Volumes
Disconnect some Volumes
Launch [Disk Management]
Help About
TeraStation III iSCSI User Manual
•
[Disconnected]: Volume is disconnected.
•
[Connected]: Volume is connected.
•
[Connected to another PC]: Volume is connected to other computer. Displays other computer's IP
address.
•
[Disabled]: No authentication
•
[Enabled]: With authentication. User authentication is needed to connect to a volume.
Search the TeraStation within the LAN.
Finish iSCSI Hard Disk Connection Tool.
Opens the Web Admin interface of the selected TeraStation.
You can change the IP address of the selected TeraStation.
If you disconnect the TeraStation without unregistering it or changing its IP
address, it will take a long time to search since the registration information
stays in your computer. In such a case, unregister the old TeraStation from
the [Remove the registered iSCSI Hard Disk] screen.
Set the CHAP password on the computer side.
this to insert the check mark. If the checkmark is not inserted, the share will
be disconnected when the computer is restarted.
Displays the screen to connect multiple volume at a time.
Displays the screen to disconnect multiple volume at a time.
Displays [Disk Management] screen on Windows.
To use the connected TeraStation, you must reserve the volume area and
format it on [Disk Management] screen.
Displays iSCSI hard drive version information.
8