Buffalo TeraStation III TS-IXL User Manual page 45

Configuring port trunking on the TeraStation:
1
Connect TeraStation's LAN port 1 to a LAN port on your switch. If you've configured a port on the switch for port
trunking, use that one. Do not connect the TeraStation's LAN port 2 yet.
2
3
4
5
Turn back on [iSCSI Service] again.
6
Connect TeraStation's LAN port 2 to a second LAN port on your switch. If you've configured another port on the
switch for port trunking, use that one.
7
Press and hold the power button on the TeraStation for 3 seconds to turn it off. Press the power button again to
power up the TeraStation.
Port trunking is now configured.
TeraStation III iSCSI User Manual
Turn off [iSCSI Service] on the left side of the Web Admin interface.
1 Navigate to [Basic] - [Network] - [Port Trunking] .
2 Click [Modify Settings].
1 Select the items to configure for port trunking.
2 Click [Save].
44