Table of Contents
Advertisement
Using RAID 0 mode
1
Delete any preexisting array as described in "Using Normal mode" on page 19.
2
3
4
5
6
The [Confirm Operation] screen will appear. Enter the displayed number and click [Apply] within 60 seconds to
continue.
7
Follow the instructions displayed on the screen.
You have configured a RAID 0 array. Refer to page 15 to create a volume on the array. Use [Disk Management] on
Windows to format the volume, then connect to the formatted volume with the iSCSI Hard Disk Connection Tool and
use it as a local drive on your computer.
TeraStation III iSCSI User Manual
In the Web Admin interface, navigate to [Basic] - [Storage] - [RAID Array].
Choose the array you want to configure.
Select all 4 hard drives.
1 Select [RAID 0].
2 Click [Create Raid Array].
24
Advertisement
Table of Contents
