Table of Contents
Advertisement
Initialization from the Web Admin interface
You can also initialize the TeraStation from the Web Admin interface.
The following settings are reset to their factory defaults:
TeraStation Name, NTP Settings, RAID Scanning, Upon restore, Email Notification Settings, UPS Settings, Administrator
Settings, Network Settings (IP Address, Subnet Mask, etc.), Alerts Sound Settings, Front Panel Settings, RAID Array Failure
Settings, Management Information, Language Settings, Syslog
1
2
The [Confirm Operation] screen will appear. Type in the confirmation number and click [Apply] within 60
seconds.
3
Follow the instructions displayed on the screen.
TeraStation III iSCSI User Manual
1 In the Web Admin interface, navigate to [Maintenance] - [Restore/Erase] -
[Restore Factory Default] .
2 Click [Restore TeraStation].
Note:
To keep the current admin username and password, navigate to
[Maintenance] - [Restore/Erase]. Click [Modify Settings]. Select [Keep current
admin password], then [Save].
40
Advertisement
Table of Contents
