Extending Volumes - Buffalo TeraStation III TS-IXL User Manual

Extending Volumes

Volume space can be extended after you create the volume.
Notes:
• Extending the volume may delete all data on the volume with some file systems. Before extending the volume, back
up any important data on the volume.
• Before you can extend volumes, you must enable LVM (page 14).
1
2
3
4
5
Click [Save] at the bottom of the screen.
6
Turn back on [iSCSI Service].
Note:
To start iSCSI service for the target volume only, navigate to [iSCSI Volumes] - [iSCSI Volumes], select the target
volume, and click [Activate].
You have now extended the size of a volume.
Note:
Your OS may not detect extended volumes. In this case, reinitialize and reformat the extended volume before use.
TeraStation III iSCSI User Manual
Turn off [iSCSI Service] on the left side of the Web Admin interface.
Note:
To stop iSCSI service for the target volume only, navigate to [iSCSI
Volumes] - [iSCSI Volumes], select the target volume, and click
[Inactivate].
Navigate to [iSCSI Volumes] - [iSCSI Volumes].
Click the volume you want to extend.
1 Check the [Enlarge Size] box.
2 Enter the amount of space to increment the volume in GB.
16