Buffalo TeraStation III TS-IXL User Manual page 47

Network attached storage iscsi
Hide thumbs Also See for TeraStation III TS-IXL:
Table of Contents

Advertisement

Volume Name
Volume Description
Disk Area
Size
Access Control
Create Volume
To display, click
[Create Volume]
on the Volume
Configuration
Screen.
Advanced Settings
Logical Volume
Manager (LVM)
LVM
TeraStation III iSCSI User Manual
Enter a name of the volume.
* You can enter up to 12bytes(UTF-8). Do not use multi-byte characters.
* Alphanumeric characters, and -(hyphen) may be used.
* Do not use a number or symbol as the first character.
Enter a description for the volume.
* You can enter up to 75 bytes(UTF-8).
* Alphanumeric characters, multi-byte characters, -(hyphen), _(underscore), and spaces
may be used.
Select hard disk space to create a volume.
Enter the volume capacity (size).
Click [Enable] for [Access Control] to apply Access Restrictions.
You will be required to enter the user name and password you entered here when
connecting with the iSCSI Hard Disk Connection Tool.
Select [Mutual Authorization] on the [User Authorization] screen upon connection
when you have set the password in [Password (Mutual Authentication)]. The screen
to enter the mutual authentication password is displayed again. Enter the mutual
authentication password you set and connect to the unit.
To restrict access by IP address, click [Enable] for [IP Address Restriction]. Only IP
addresses that are entered in the [IP Address List] are allowed access.
Input parameters for IP address restrictions
• Enter all IP addresses as 192.168.11.1,192.168.11.2.
• Use commas to separate IP addresses.
• You can simply type 192.168.11.1 if there is only one IP address.
• All IP addresses will be allowed if nothing is entered.
• Only entered IP address(es) are allowed to connect.
Not supported.
If you change settings here and can no longer connect to a volume, restore default
settings and reconfigure.
Selecting a drive and clicking [Enable LVM] will enable the Logical Volume Manager
(LVM) for the selected drive.
Selecting a drive and clicking [Disable LVM] will disable the Logical Volume Manager
(LVM) for the selected drive.
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Terastation iii ts-rixl

Table of Contents