Chapter 8 Configuration Utility; Common.settings; Iscsi.volumes - Buffalo TeraStation III TS-IXL User Manual

Iscsi
Hide thumbs Also See for TeraStation III TS-IXL:
Table of Contents

Advertisement

Chapter 8
Configuration Utility
The following options can be set from the configuration screens.
Common Settings
Common Settings (Displayed on the left side of the screen)
iSCSI Service
Name
Firmware version
IP Address
Place
Manager
Clients
Locate TeraStation
Restart/Shutdown
Logout (displayed on the upper
right of the screen)
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes
iSCSI Volumes
TeraStation IS Setup Guide
Click "OFF" to stop iSCSI service. Click "ON" to start iSCSI service. Stop iSCSI service before
creating or extending volumes,
Displays the TeraStation's name.
Displays the TeraStation's firmware version number.
Displays IP address of the TeraStation's LAN ports 1 and 2.
Displays the Place from "Basic" - "Settings" - "Management Information".
Displays the Administrator from "Basic" - "Settings" - "Management Information".
Displays connected client
Click to make the TeraStation beep.
To restart the TeraStation, click "Power Management", then "Restart". To turn off the
TeraStation, click "Shutdown" under "Shutdown TeraStation" screen.
Log out of the Configuration Utility.
To add volumes, click "Create Volume".
To edit a volume, click a volume name.
Select a volume and click "Delete Volume" to delete the volume.
Click "Refresh" to update the volume information.
Select a volume and click "Active" will enable the iSCSI service for the selected volume.
Select a volume and click "Inactive" will disable the iSCSI service for the selected volume.
Note: If the IP address of the computer is displayed in the iSCSI volume screen even
though the iSCSI volume is not connected to the computer, enabling or disabling
the iSCSI volume or LVM will fail.
Turning off or disconnecting the computer without disconnecting the drive with
the iSCSI HD Connection Tool may cause this symptoms. If this happens, connect
the iSCSI volume with the iSCSI HD Connection Tool after rebooting the computer,
or stop the iSCSI service once and perform enabling/disabling operation of iSCSI
Volume or LVM.
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Terastation iii ts-rixl

Table of Contents