Identification Of Entries - Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual

Appendix
October 2019
C.7.2

Identification of Entries

The XTE3000 electric actuator is equipped with 5 entries (3 are standard; the 4th and 5th
are supplied upon request).
With reference to Figure C-2, the thread form/size for each entry is as follows:
Table C-4.
Entry
1
2
3
4 (optional)
5 (optional)
Figure C-2
5
NOTICE
When alternative entries according to ISO 965 are used, indication of the dimensions is
imprinted on the adapter bush or directly on the housing when ISO 965 entries are
obtained by machining the housing.
WARNING
Unused entries may remain unmachined or must be plugged with a certified plug suitable
for the subject environment.
140
NPT size
1"
1 1/2"
1"
3/4"
3/4"
Base Actuator
1 2 3
Installation, Operation and Maintenance Manual
Alternative (Metric size ISO 965)
M32x1.5
M40x1.5
M32x1.5
M25x1.5
M25x1.5
6
4
MAN-02-04-97-0713-EN Rev. 1
XTE3000
Appendix