Section 6: Local Controls
October 2019
Section 6: Local Controls
6.1
Description of the Local Operator Interface
The following functions are available via the XTE3000 local operator interface:
•
•
•
The figures on the following pages describe the function of each component of the local
operator interface.
Figure 52
1.
40
Actuator Control
Actuator Configuration
Actuator Status Visualization
Local Operator Interface Components
OLED Graphic display: during normal operation the alphanumeric display shows the
present status (NORMAL, ESD ON, ALARM, WARNING, INTERLOCK), the 3-position
selector status (LOCAL, OFF, REMOTE), and the actuator action (OPEN, OPENING,
CLOSED, CLOSING, STOP, or R% : xxx.x). If the local selector is in OFF or REMOTE,
pressing the YES push-button allows the user to scroll through the list of variables,
alarms, and reports:
Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
Local Controls