Terms And Conditions; Identification Plate - Emerson Bettis GVO LP DA Installation, Operation And Maintenance Manual

Double-acting pneumatic linear actuator
Table of Contents

Advertisement

Section 1: General Warnings
October 2020
1.1.2

Terms and Conditions

Emerson guarantees that all the items produced are free of defects in workmanship
and manufacturing materials and meet relevant current specifications, provided they
are installed, used and serviced according to the instructions contained in the present
manual. The warranty can last either one year from the date of installation by the initial
user of the product, or eighteen months from the date of shipment to the initial user,
depending on which event occurs first. All detailed warranty conditions are specified in
the documentation forwarded together with the product. This warranty does not cover
special products or components not warranted by subcontractors, or materials that were
used or installed improperly or were modified or repaired by unauthorized staff. In the
event that a fault condition be caused by improper installation, maintenance or use, or by
irregular working conditions, the repairs will be charged according to applicable fees.
The warranty and Emerson liability shall lapse in the event that any modification or
tampering whatsoever be performed on the actuator.
1.2

Identification Plate

It is forbidden to modify the information and the marks without previous written
authorization by Emerson.
The plate fastened on the actuator contains the following information (Figure 1).
Figure 1
2
Data Plate
Installation, Operation and Maintenance Manual
VCIOM-15792-EN Rev. 0
General Warnings

Advertisement

Table of Contents
loading

Table of Contents