Identification Of Entries - Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
A.7.2

Identification of Entries

The XTE3000 electric actuator as it pertains to this appendix can be equipped with up to 5
conduit entries (3 are standard; the 4th and 5th are supplied upon request).
With reference to Figure A-2, the thread form/size for each entry is as follows:
Table A-4.
Entry
1
2
3
4 (optional)
5 (optional)
Figure A-2
5
NOTICE
When alternative entries according to ISO 965 are used, indication of the dimensions is
imprinted on the adapter bush or directly on the housing when ISO 965 entries are
obtained by machining the housing.
WARNING
Unused entries may remain unmachined or must be plugged with a certified plug suitable
for the subject environment.
Appendix
Identification of Entries
NPT size
1"
1 1/2"
1"
3/4"
3/4"
Electric Actuator
1 2
Metric size ISO 965 (alternative)
M32x1.5
M40x1.5
M32x1.5
M25x1.5
M25x1.5
4
3
Appendix
October 2019
119