AJAX Hub 2 User Manual page 7

channels. The bright green or white logo color indicates that the hub is
connected to Ajax Cloud.
If the Ethernet connection does not occur automatically, disable proxy, ltration by MAC
addresses and activate the DHCP in the router settings: the hub will receive an IP
address. During the next setup in the web or mobile app, you will be able to set a static
IP address.
4. To connect the hub to the GSM network, you need a micro SIM card with a
disabled PIN code request (you can disable it using the mobile phone) and a
su cient amount on the account to pay for the GPRS, SMS services and calls.
If the hub does not connect to Ajax Cloud via GSM, use Ethernet to set up the
network parameters in the app. For the proper setting of the access point,
username, and password, please contact the support service of the operator.
Adding a hub to the Ajax app
Ajax app
1. Open the
a mandatory condition for controlling the Ajax security system via the smartphone/tablet. When
using Android, we recommend to follow
2. Login into your account. Open the Add Hub menu and select the way of registering: manually or step-
by-step guidance.
3. Type the name of the hub and scan the QR code located under the lid (or enter a registration key
manually).
4. Wait until the hub is registered and displayed on the app desktop
Security system users
After adding the hub to the account, you become the administrator of this device.
One hub can have up to 50 users/administrators. The administrator can invite
users to the security system and determine their rights.
. Granting access to all system functions (to display noti cations in particular) is
push noti cations con guration instructions
.
.