Installation - AJAX Hub 2 User Manual

Connection to the Central Monitoring Station (CMS) is implemented via the Contact
ID or SIA protocol.

Installation

Prior to installing the hub, make sure that you have selected the optimal location:
the SIM card demonstrates consistent reception, all the devices have been tested
for radio communication, and the hub is hidden from direct view.
The device developed only for indoor use.
Make sure that communication between the hub and all connected devices is
stable. If the signal strength is low (a single bar), we do not guarantee a stable
operation of the security system. Implement all potential measures to improve the
quality of the signal! At least, relocate the hub: even 20 cm shifting can signi cantly
enhance the signal reception.
If, after the relocation, signal strength is still low or unstable, use the
signal range extender
While installing and using the hub, follow the general electrical safety regulations
for using electrical appliances, as well as the requirements of regulatory legal acts
on electrical safety.
Hub installation:
1. Fix the SmartBracket mounting panel (the hub lid) with bundled screws. When
using any other xing accessories, make sure that they do not damage or
deform the hub lid.
We do not recommend using double-sided adhesive tape: it cannot guarantee secure
attachment and simpli es the removal of the device.
.
ReX radio