AJAX Hub 2 User Manual page 24

The Ajax security system can ignore alarms or other events of devices without
removing them from the system. Under certain settings, noti cations about
events of a speci c device will not be sent to the CMS and security system
users.
There are two types of Devices Auto Deactivation: by the timer and by the
number of alarms.
What is Devices Auto Deactivation
It is also possible to manually disable a speci c device. Learn more about
deactivating devices manually
Clear noti cations history
Clicking the button deletes all noti cations in the hub events feed.
Monitoring Station — the settings for direct connection to the security
company's central monitoring station. Parameters are set by security
company engineers. Keep in mind that events and alarms can be sent to the
central monitoring station of the security company even without these
settings.
"Monitoring Station" tab: what is it?
Protocol — the choice of the protocol used by the hub to send alarms to
the central monitoring station of the security company via a direct
connection. Available protocols: Ajax Translator (Contact-ID) and SIA.
Connect on demand. Enable this option if you need to connect to the CMS
(Central Monitoring Station) only when transmitting an event. If the option
is disabled, the connection is maintained continuously. The option is
available only for the SIA protocol.
Object number — the number of an object in the monitoring station (hub).
here .