Table of Contents
Advertisement
Appendix
Industrial-PC C3320
Industrial-PC C3330
Industrial-PC C3340
Industrial-PC C3350
Do not use the PC in areas
of explosive hazard
Environmental conditions
Shock resistance
Protection class
Power supply
100-240 V
power pack
AC
Power supply 24 V
DC
power pack (optional)
Electromagnetic
Compatibility (EMC)
Transport and storage
i
Note
FCC Approval for USA
FCC Approval for Canada
C33xx
Technical data
Dimensions (W x H x D):
Weight:
Dimensions (W x H x D):
Weight:
Dimensions (W x H x D):
Weight:
Dimensions (W x H x D):
Weight:
The Industrial PC may not be used in areas of explosive hazard.
The following conditions must be observed during operation:
Ambient temperature:
Atmospheric humidity:
Sinusoidal vibration:
(EN 60068-2-6)
During reading of CD-ROM: 10 to 58 Hz: 0.019 mm
Impact:
(EN 60068-2-27)
During reading of CD-ROM: 5 G (~ 50 m/ s²), duration: 11 ms
Protection class:
Supply voltage:
Power consumption:
Supply voltage:
Power consumption:
Interference resistance:
Emitted resistance:
The same values for atmospheric humidity and shock resistance are to be
observed during transport and storage as in operation. The shock
resistance during transport can be improved by means of suitably packing
the Industrial PC. The ambient temperature during storage and transport
must be between -20°C and +65°C.
Pixel errors in the TFT display are production-caused and represent
no complaint-reason!
Approvals
FCC: Federal Communications Commission
Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
FCC: Canadian Notice
This equipment does not exceed the Class A limits for radiated emissions
as described in the Radio Interference Regulations of the Canadian
Department of Communications.
482.7 x 355 x 282 mm
18 kg (basic configuration)
482.7 x 400 x 282 mm
18,5 kg (basic configuration)
482.7 x 355 x 282 mm
18,5 kg (basic configuration)
482.7 x 444 x 282 mm
19 kg (basic configuration)
0 to 55°C
Maximum 95%, non-condensing
10 to 58 Hz: 0.035 mm
58 to 500 Hz: 0.5 G (~ 5 m/ s
58 to 500 Hz: 0.25 G (~ 2.5 m/ s
5 G (~ 50 m/ s²), duration: 30 ms
IP 65 (front side), IP20 (back side)
100-240 V 50-60 Hz
100 W for the basic version
22 – 30 V
DC
100 W for the basic version
according to EN 61000-6-2
according to EN 61000-6-4
Appendix
2
)
2
)
29
Advertisement
Table of Contents
