Kongsberg M3 Sonar Operator's Manual page 39

Procedure
1 Power up the hardware.
2 Double click the Hypack icon on the desktop to run the Hypack software.
→
3 Click
Survey
4 Make sure the correct drivers have been
selected for HYSWEEP surveys.
a In the
HYSWEEP Survey
→
click
View
Observe that the
dialog box opens.
b Select the
Select Boat Corrections
tab.
c For
Heading
d For
Heave
drop-down lists.
e Click .
OK
5 Wait for the "NO SYNC" yellow status to appear.
6 Wait another 30 seconds while the Hypack software synchronizes the computer clock
with the GPS.
922-00037041/1.1
HYPACK Survey and HYSWEEP Survey
window,
.
Device Selections
Device Selections
, select Hypack Navigation from the drop-down list.
and , select Kongsberg Seapath (Network) from the
Pitch / Roll
Operating procedures
.
37