M3 Sonar PHS Operator Manual
l
Enter the static draft distance you measured earlier into the
leave the vertical offset at zero if you are using RTK Tide.
6
Make sure the clock is synchronized to the GPS.
a
On the left side of the
Hardware.
b
Make sure that GPS NMEA-0183 is selected in the
drop-down list.
Clock
7
Close the
HYPACK Combined Hardware
8
Make sure the correct drivers have been selected for HYSWEEP surveys.
30
HYPACK Combined Hardware
dialog box.
text box, or
Vertical
dialog box, click on
Select Device to Synchronize
922-00037041/1.1