Kongsberg M3 Sonar Operator's Manual page 23

e Click
Add Device
Reference Unit (MRU) with the following device properties.
Name:
Protocol:
Port Location:
Port#:
f If you have a standalone sound speed sensor, click
Valeport MiniSVS for the sound speed sensor with the following device properties.
Note
If you are using a Sonar Head with an integrated sound speed sensor, you can skip
this step. You do not need to add the sound speed sensor as a separate device.
Name:
Protocol:
Port Location:
Port#:
g Select each sensor device and click the
h Make sure that the sensor string is being displayed in the
Note
The sound speed sensor string is only visible if the sensor is in the water.
i Click
Stop Test
7 Make sure the sensors are set up as master references and that the sonar is oriented
downwards.
922-00037041/1.1
, then set the Protocol TSS (heave, roll, and pitch) for the Motion
MRU
TSS
PC UDP
31301
Sound Speed Sensor
Valeport MiniSVS
PC UDP
4001
when done.
Operating procedures
Add Device
button.
Test Device
Port Monitor
, then set the Protocol
box.
21