M3 Sonar PHS Operator Manual
6
Make sure the Seapath 130 sensor unit, Motion Reference Unit (MRU), and sound
speed sensor are set up as sensor inputs in the software.
a
Click
Setup
b
Click
Add Device
sensor unit with the following device properties.
Name:
Protocol:
Port Location:
Port#:
c
Click
Add Device
sensor unit with the following device properties.
Name:
Protocol:
Port Location:
Port#:
d
Click
Add Device
130 sensor unit with the following device properties.
Name:
Protocol:
Port Location:
Port#:
20
→
System Configuration
, then set the Protocol GGA (GPS position) for the Seapath 130
Seapath Position
GGA
PC UDP
31098
, then set the Protocol HDT (vessel heading) for the Seapath 130
Seapath Heading
HDT
PC UDP
31098
, then set the Protocol VTG (course and speed) for the Seapath
Seapath Speed
VTG
PC UDP
31098
→
→
Devices
Sensors Setup
.
922-00037041/1.1