Kongsberg M3 Sonar Operator's Manual page 28

M3 Sonar PHS Operator Manual
c Make sure that the
The factory-configured Seapath output is on UDP port 31099.
d Click
Test Device
The window will open.
Test
e Make sure that GPS data is being received.
f Close the
Test
g Select the
Offsets
h Enter the static draft distance you measured earlier into the
leave the vertical offset at zero if you are using RTK Tide.
26
Device Connection
.
window.
tab.
field appears as shown.
text box, or
Vertical
922-00037041/1.1