probst VM-301-KJ-GREENLINE Operating Instructions Manual page 9

Safety
Joystick / control lever:
Movement directions for the Control / operation of attachments (e.g.
for opening and closing the main and side clamping at a HVZ)
Electronic joystick with function controls as well as activations of
additional functions.
Function controls: for controlling of a hydraulic installation clamp
(HVZ) → opening and closing of the main and side clamping.
Additional functions:
- Rotating movement of a hydraulic rotator
- Vacuum operation (suction and release of load)
- Horn/reset button (reset button for releasing the seat switch)
Reset button for driving must be pressed each time the laying
machine is started, or the driving was stopped due to the driver
getting up from the driver's seat (triggered by the seat switch).
The reset button (and driving the machine) only works when the
driver is in the driver's seat.
Press and hold the button (in the driver's cabin next to the ignition
switch) for at least 2 seconds to start the system.
Release the parking brake when the LED (in the driver's cab next to
the fuses) lights up red.
Fuses (symbols and ampere rating) in driver's cabin.
51500024 V2
2904.0260 50 x 50 mm
29040836 70x55 mm
29040835 50 x12 mm
29040834 40 x33 mm
29040808 125 x45 mm
8 / 43
GB