Scope Of Services - probst VM-301-KJ-GREENLINE Operating Instructions Manual

Installation machine
Table of Contents

Advertisement

For the use of this product, the following additional instructions must be observed:
Only use the charger approved by Probst GmbH to charge the system
Do not load the system above the currently permitted current values
Do not disconnect or shut down the system under load
Do not disconnect the power plug under load
Only switch off the system when it is at standstill
Do not switch off the system in a discharged state for long periods of time, but connect
it promptly to the appropriate, active charger (principle: "charging")
Switch off the system if the signal tone is continuous
Only use the system under the specified tightness classes
3

SCOPE OF SERVICES

The battery storage system includes the following components:
lithium-ion modules
o Number2
o System interconnection 7s36p
Number of temperature sensors 4
Electrical heating functionYes
Separating device
Fuse ANL
Power interfaceSB175 Connector
BMS (Battery Management System) & EMS (Energy Management System)
Acoustic signaler
Deep discharge protection
4Gb microSD card for data logging
Pressure compensation diaphragm & outgassing valve
Communication cable with stand-alone termination and mating connector
Digital enable signal
The system is complete on the part of Probst GmbH when delivered. The customer is
responsible for the final assembly and the correct installation of missing components as well as
the power and communication cabling in the vehicle.
In case of questions or ambiguities, please always contact Probst GmbH.
Modules
Relay (mechanical isolator)
Bolt-down 355 A
EV200
4

Advertisement

Table of Contents
loading

Table of Contents