Operation
4.5
Driving with the installation machine
When reversing with the installation machine, the "blind spot" of the machine must always be observed!
Otherwise there is a risk of accident and death!
When leaving the installation machine, the attachment (e.g. HVZ) must be placed on the ground, the
parking brake pulled (and the system switched off) !
When driving on terrain with an incline, the following must be observed:
•
Lower the boom arm with attachment (e.g. HVZ) both with and without load (e.g. brick layer) as far as
possible.
•
extremely careful and slow (slow walking pace) driving style is required
•
abrupt braking (by changing the direction of travel with the foot pedals) is prohibited!
Otherwise there is a risk of tipping over, →accidents and death!
Emergency situation: the installation machine threatens to tip over, boom arm with attachment (e.g. HVZ)
immediately lowered!
4.6
Driver seat adjustment
Adjust the adjustable driver's seat according to body height and
weight:
•
Lever ① (bottom right) for seat back and forth
•
3-fold height adjustment: Pull the seat all the way up.
•
Lever ② (rear left) for backrest forwards and backwards
•
For twill weight adjustment (scale ④), turn the rotary handle
③ (centre front down) to the left or right.
51500024
①
③
V2
25 / 43
④
②
GB