Mechanical Properties - probst VM-301-KJ-GREENLINE Operating Instructions Manual

4

MECHANICAL PROPERTIES

Figure 1: Double module energy storage system (left) and single module energy storage system (right)
4.1 KEY DATA
MECHANICAL
Designation
Weight
Dimensions
Maximum torque at M6 battery power
contact (minus, plus)
Protection class
Table 1: Mechanical maximum values.
Further mechanical data and detailed geometric views can be found in Appendix 1_Design
drawings.
4.2
ENVIRONMENTAL CONDITIONS
Designation
Ambient temperature Storage
Ambient temperature Operating1
Discharge temperature range (battery module)
Charging temperature range (battery module)
Air humidity
Elevation gain
Table 2: Thermal characteristics
system temperatures below 10°C the performance is severely limited. The heating function heats the battery to over
1At
10°C to allow full performance from the start.
4.3 FASTENING
The system can be attached to the mounting plates on the lower side on a floor plate or on a
wall. When orienting, make sure that the cables are not pointing downwards. The system must
not be mounted horizontally on the top, one side or front or back.
36kg7s72p | 14s36p
480 x 325 x 185 mm7s72p
-20 °C to 50 °C
-20 °C to 50 °C
-20 °C to 59 °C
1
1
max. 60 % (non-condensing)
Up to 2000m above sea level
Value
| 14s36p
5 Nm
IP 54
Value
0 °C to 45 °C
5